What are the best tips for using brick stones?

When using stones made of bricks for the landscaping project, several basic tips should be followed for the best results. Plan the design in advance and create an outline on the ground before starting. Buy the right climate tiles and have enough materials and tools to complete the project. Dig the work area and install good base material. Create a surface pitch for drainage, use the edge to keep the brick tiles in place and fill the joints with mortar or polymer sand for stability.

It is very important to plan the design that will be used before the project starts. Use graphical paper or computer program to determine the amount and type of stones made of bricks needed for task. This plan will also help to calculate the amount of base material needed to stabilize the surface. Further measure and mark the outline of the area on the ground. This will help determine the amount of excavation required to prepare the surface for the tiles.

Brick Pakamens Ving are sold in different levels for differentclimate. Be sure to buy the right type of prison to avoid future problems with rupture and breaking. Leave several extra bugs and future corrections when calculating the required amount of bricks. Do not forget to have another basic material at hand to compensate for soft soil. Buy or rent all necessary tamping and cutting tools before starting the project.

dig a distinctive area to sufficient depth and install a 4 -inch (10 cm) layer of gravel followed by 2 inches (5 cm) tiles. The upper part of this base material must be deep enough to make the surface of the brick paving stones at the ground level. Each layer of base material should be pulled out to prevent the palms from settling during rain transport. A motorized machine can be used for large areas. Smooth the top layer of the sand with the board and build the ER level.

is also an importantGround to give a paved surface a slight spacing to ensure sufficient water drainage. This course should direct water from all nearby buildings or houses. Around brick paving stones, it will be necessary to install some type of edging material to keep them in place after installation. This edge should be installed deep enough to also contain the base material. Fill the joints between the bricks with polymer sand or mortar for added stability

.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?