What are the different types of TV Wall Mounts?

While small CRT or tubes are often mounted to save space, large flat TVs are also mounted instead of their location on a stand or pedestal. The TV mounted flat panels creates a distinctive, very modern look and at the same time creates a theater experience in the home. Domestic cinema displays required proprietary configuration mounts of television walls, but manufacturers have since agreed on some basic configurations that allow customers to buy universal television walls. This can save consumers' money and preliminary holes at the back of the television facilitate installation. The rails are made to use the preliminary holes at the rear of the display. The railing usually consists of two perpendicular arms with the devices pointing with the backs that connect to the wall plate.

Once the rails and the board are installed, the TV can simply be "hung" on the wall plate. For the purposes of the center can move to the leftor right over the length of the wall plate. If the TV must be removed, it can easily be lifted from the TV wall holder.

TV wall mounts are made of steel and designed to hold specific weight ranges, usually defined by the size of the screen. The base holder of the flat panel wall walls can be evaluated for 26-42 inches (66-107 cm) with a maximum weight of £ 100 (45 kilograms), while another type can be for 42-50 inches (107-127 cm) display with a maximum weight of £ 150 (68 kg). TV wall mounts designed to hold larger displays are sometimes called "two-bullshit" mountains. Wall plates are designed to attach to two pins rather than one. If the TV is mounted on the concrete wall, cement anchors could be used. Delay screws and other necessary hardware should come.

for the purest look are standard to holdTV walls to keep the screen with a flat screen within one inch (25 mm) of the wall. With this type of holder, the TV cannot be tilted. It must be suspended at the correct height within the main observation range and will be seen from this stationary position.

For those who want to change the angle, they are tilted onto the wall walls. Mount for tilt is very similar to stationary models, but keeps the display further from the wall. This allows the bottom of the flat panel to be pushed towards the wall and brings the upper part forward. Depending on the model and manufacturers, the tilt levels will have tilt TV walls.

In addition to the tilt degree, another important factor is to be considered, design. Some tilt brackets work on the principle of Rocatka, in which the tilt is simply modified by moving the display to the desired angle. Other tilt handles include a tool that is necessary for the Change angle. If you change the angle frequently, the former model is likely to stand for DaThe cost of its comfort.

Before buying on the wall, note that not all flat panel TVs have a flat back. Some models have a small protruding modular "box" where the TV interface is located. If you have this type of TV, you will require tilting on the wall wall wall. The standard wall holder does not allow the box while the tilt keeps the display far enough from the wall to stay. In this case, the tilt serves as a stationary holder.

Some of the TV wall holders allow the display to turn from the wall to the arm, tilted up or down or rotated to the left and right. This type of holder is called articulation wall mounting and is mainly used with smaller LCD displays. Small CRT TVs can also use articulation weapons that come with a TV platform.

While these are the most popular types of Mounts TV walls, there are others. For very large rooms one couldto decide for the ceiling holder. The main ceiling holder consists of a small base with a stretched descent arm with tongue and height elements. This allows the flat panel to be placed in a furnished area that does not have a wall.

There are also wall wall brackets that allow 90 degrees to turn. This might be useful for watching TV while lying on your side on the couch. If you have a small display, you may want to "turn" the holder under the kitchen cabinets or perhaps for the home engine. Some wall -mounted wall holders have "safety features" that allow you to request the TV to the wall plate to discourage theft.

The

TV Wall Mounts ranges from approximately $ 60 to more than $ 350, and while the possibilities make the difference, often basic styles without added function or benefits can move as wide. Make notes about any special features that would justify an increase in price compared to the Similar product from another manufacturere or seller. If the holder is evaluated for the flat panel and the weight of the right size and the specifications are satisfactory, the product should work nicely regardless of the price.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?