What are the different parts of Viola?

Like the violin, there are several main parts of Viola. The Viola body is usually the largest and best known, and it is also divided into three parts. The Viole body is connected by a long narrow strip of wood, and this is referred to as a fingerboard or neck. The chains also run from the tool body to the end of the neck. It is also necessary to create a bow to create the instrument for the instrument.

Viola is an instrument in the family of strings, more specifically in the violin. This chain instrument is usually less than cello, but larger than the violin. On average, the bodies of most violes are about 16 inches (40.6 centimeters) long, but smaller versions are available.

The body is the most important of all parts of Viola. It is a large wooden piece at the bottom of the tool, shaped as an hourglass. The interior of this part is hollow, allowing sound vibration. Photoists decorate on both sides of the body.

the lower body, known as the lower match, is slightly larger than the upper nopart. On this section there are chin and tail piece that holds strings. The center of the body is known as a waist and a bridge that holds strings far from the body, is located here. The upper match is the upper part of the hourglass and the finger plate is connected here.

Footage is also one of the parts of Viola. It is a long narrow strip of wood on which the strings lie. When the musician presses his fingers on certain chains in different parts of the fingerboard, the instrument produces different pitch or notes.

As mentioned above, the lower part of the fingerboard is attached to the Viole body. The upper part of the fingerboard extends around the body. This is sometimes referred to the neck.

The carved end of the neck of Viola is known as the scroll. Other parts of Viola, matching pins are connected to the scroll. The strings are stretched through these pins and when the pins are turned in one way or the other, the strings are either tightened or released. Tightening or release of chains creates different playgrounds needed to tune the tooloje.

other important parts of Violes are strings. Viola has four chains that are usually stronger than violin strings. Viola's thickness is what helps create a lower tool spacing.

Although it is usually not considered one of the parts of Viola, it is necessary to play the tool. It consists of a wooden rod with a horse or synthetic horse brain stretched between each end. Draging the bow through the strings causes them to vibrate, causing the tool to make sounds.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?