What are the different types of chimney design?
The correct chimney design is important not only for mixing the chimney with a general due to the fireplace or stove, but also for its proper functioning. After all, the purpose of the chimney is to serve as a smoke departure and should be able to effectively. There are a number of chimney designs that meet both local chimney requirements and aesthetic considerations.
The most common types of chimneys are masonry chimneys. Chimney masonry made of brick, concrete or stone is part of a general building building. This type of chimney design is used to provide places of traditional or rustic appearance. Inside the chimneys, it generally gives a better dive than outdoor chimneys. The design is hot air or hot gas that rises from The fire and escapes through the chimney.
chimneys work on the natural principle of air and gases that always range from high pressure to low -pressure areas. Hot gases from the fire move up up the chimney and one hundredThey clamp faster if there is a large temperature difference between them and the external air. After their furrow, hot gases create a low -pressure area, which is then filled with fresh air, which helps in combustion and keeps the fire running. If hot gases are unable to leave the chimney fast enough, there are problems such as preparation, the formation of tar creatosot due to condensation of smoke on the surface of the chimney and poorly burning fire.
Since these problems are impaired by bends and obstacles in the chimney design, the chimney design is ideal; However, other considerations about the building do not always allow a perfectly straight chimney. The size of the chimney, opening, through which the gases leave the chimney, is also an important factor in the good performance of the chimney; Too small or too large smoke can prevent or slow down the outgoing proposal. The chimney must also be best placed on the highest roof and be at least three feet (91.44 centimeters) above the roof.
In addition to masonry chimneys are also very popular chimneys made of Továrny. These chimneys are made of metal as stainless steel, are much cheaper and much easier than masonry chimneys. In this case, the chimney installation is only a matter of re -assembling parts on the spot.
factory chimneys are available in various types of chimneys such as mass insulated chimneys, air insulated chimneys and air -cooled chimneys. All three are formed by two metal layers, while the mass and air act as thermal insulators in the first two cases and is used to disperse heat in the second. It is also possible to obtain chimneys that are to combine principles for heat insulation and heat scattering.
whether masonry or factory, chimneys require that they rework and cleaned from time to time. For this purpose, you can hire a chimney company and can also repair the chimneys if necessary. A well -designed, well -shaped chimney can change all the difference in the effective performance of the fireplace.