What is a wall management?

The wall management is the surface material installed at the top of the Zdice structure. Depending on the desired function and appearance, the wall management can be made of any number of materials, including stone, concrete or metal. The wall management components are often known as the wall caps in many parts of the world.

The wall caps serve a number of functions on the wall installation. They help keep water outside the wall, minimizing the risk of frost damage and thawing over time. Matching also protects the upper part of the wall from physical impacts or damage. In many applications, the management of walls is chosen primarily for its aesthetic attraction. Different types of coping can give walls a smooth, polished look while helping to hide mortar or harsh stone surfaces in terms of perspective.

Usually, the stone wall is reduced in place using a standard masonry mortar. The lower part of the coping often contains grooves that hold the mortar, allowing the cap to sit straight against at the top of the wall. Stone or metal can handleThe ease is cut wider than the wall to form overhangs on both sides. This helps to drain water from the wall and helps to protect the wall from damage.

wall management is available in a number of shapes and profiles depending on the desired surface. It can be graded or square for a traditional look or rounded to create a more modern surface. Mastering is also available with a beveled profile and builders can also order their own profiles that correspond to existing management or create a completely new look.

Every piece of coping is connected together to create a tight bond with a neighboring section. Some metal or clay materials may include integral connectors that allow neighborhood pieces to connect or overlap a waterproof binding. Installation staff should choose the right management design based on where each section will be installed. They use specialEnding pieces end the wall, while the L -shaped pieces or T -shaped must be used in most corners or intersections.

Depending on the material, the handling of cutting can be so that they fit into the field or preliminary at the factory according to the specified dimensions. Many natural stone products are cut in place using a hammer and chisel, while the manufacturer is completed composite or metal materials. The thickness may vary depending on the desired appearance of the wall.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?