How can I choose the best stucco?
If you want to choose the best stucco, decide if you want three layers or one coat of stucco, determine which coat you apply, and decide if you want any accessories to complete the stucco. Traditional stucco is applied in three layers, but there is also one coat mixture. If you use a traditional three coat application, make sure you know which mix you use for a coat you apply, because each of them is slightly different. Once it decides on the basics of your stucco application, you can choose to add ingredients to the mix to achieve different results.
Traditional stucco consists of Portland cement, hydrated lime and sand. Newer mixtures of the disposable units contain acrylic fibers and various chemicals, so one mixture can be used for the entire stucco application. One coat mixture still requires multiple layers, but the simplified mixture can make the whole process easier. Consider whether you are willing to mix separate batch of stucco mix for different layers orIf you can work better for you. Remember that the stucco mixtures One-Cat will still require several layers to achieve the right thickness, but for all these layers can be used the same mixture.
6 The application of stucco should begin with a scratch, which consists of one part of Portland cement, one part of a hydrated lime and two and a half to four parts of the sand. This layer forms a base layer of stucco and links to a stucco net or lath that should be installed on the building. Make sure that the mixture you use for this layer is designed to create a base layer of stucco.Another layer is a brown coat, which should smash the highest concentration of sand in the application of three wheels. It has been known that some suppliers will skip this layer, but if you want to include it, there are mixtures on the market that are specially made for a brown coat. The stucco installation is completed with a target coat.This mixture should have the smallest amount of sand to have a smooth surface.
to the target coat of the stucco mixture can be added different folders to create different effects. Some mixtures add acrylic fibers that increase strength and flexibility to stucco, but also allow texture to be created. Some common stucco textures are marble, adobe and swirling and pre -made mixtures that allow you to create these textures, can often be found in hardware stores. The pigment can also be added to the stucco mixture during the target coat to create different stucco colors. If it is something you would like, look for a mixture of the target coat that has a pigment in it or can have a pigment.