What are the different types of plasterboard?

plasterboard is a building material made of sand, water and gypsum. This product is one of the most used products in the world for the construction of walls, ceilings and other architectural elements. The plasterboard leaves are installed using screws that attach them to the members of the building framing. The installation workers then complete the surface of the plasterboard to provide the desired look. The surface treatment of plasterboard comes in a number of different varieties that can be categorized as smooth or textured.

Smooth surface treatment of plasterboard is installed in accordance with standards developed by the American GA-214-96 document. These standards refer to six levels of smooth plasterboard and are considered an industrial standard in North America. This system not only allows plasterboard to provide accurate estimates, but also helps to facilitate communication with installation workers, leading to more accurate results.

for temporary walls or when the final desired f isInice is unknown, level 0 is used. At level 0, the plasterboard leaves are installed without the use of a tape or joint compound. The plasterboard adjustments of level 1 are designed for walls that are hidden from supervision and have a layer of plasterboard strips built into one layer of joint compound. Adjustment level 2 is virtually identical to level 1 and is used if appearance is not a problem. Again, one layer of tape and joint compounds is used, although fewer tools are allowed.

Gypsum plasterboard adjustment is used for walls that will be exposed to public view, but will also be covered with thick or matt colors. The level 3 walls have a built -in tape along with two layers of plasterboard or joint compounds. The standard surface treatment of smooth plasterboard is level 4, which includes three layers of the joint mixture above the tape, with smooth cut walls. For areas exposed to JASNY or hard lighting or those USEDs with high glossy colors, level 5 is recommended.

textured plasterboard varies from low to high texture and can be installed using a sprayer, squeegees, paint cylinders or a combination of these tools. Some of the lowest texture surfaces are vortex patterns where the pivotes are used to apply the joint compound in overlapping swirl, similar to the scale of fish. Medium textures include pearlite, with small foams or sand particles sprayed onto a wall or slip, which contains elevated stains on the wall that resembles concrete. Highly textured surface treatment of plasterboard is usually sprayed and includes orange peel, which is bumpy as an orange or acoustic popcorn skin, which is used to create densely textured ceilings of plasterboard.