What are the different types of parts KEGERATOR?

is a device designed to cool and release beer. It consists of a series of parts that work in a context to drive beer from a barrel to a glass. The main parts of the Kegeror are refrigerators, pump, clutch and faucet. Almost any size or style of the refrigerator can be used, but "mini-pridge" is a practical and popular selection. If the freezer is used on the chest, it will probably require the thermostat to check the temperature. CO _{2 comes in additional cylinders available in different quantities. A standard cask pump is sometimes used as an alternative, but is generally considered less desirable because it allows a faster beer distribution. The cylinder is used as one of the KEGERATOR parts, requires a regulator. It is a pressure meter that is attached to the tank by the 2 to monitor and maintain the pressure level of the gas needed to release beer. Regulators come in individual and double varieties. A single gauge measures only gas pressure while double meter measuring tPainting entering the tank and the remaining air supply.}

A piece that actually connects to the barrel and allows it to be tapped is called a barrel clutch. It must be connected to the controller using a piece of hose called air line jumper to properly drive beer from the kegerator. In order to give beer, the court SOG Cupler must be connected to the faucet, which is a real tap where the beer comes out.

For the connection of the barrel to the faucet, two other parts of the kegerator are required. Another piece of tubing, called a sweater of the beer line, attaches the court SOG Cupler to a metal piece called Shank. The pun fits into a hole that was drilled to the front of the refrigerator door. The inner side is attached to the beer tubing tubing and to the outside to the faucet.

In some circumstances, especially when a freezer is used as a kegetor, a metal piece called the tower replaces a faucet. This long metal cylinder creates a more authentic look "tYČ "and has his own faucet. Faucettes and towers require a handle, which is a button that is attracted to release beer. Under the faucet, the drip tray is suitable for capturing residual leaks or bands.