What are the washing machines?

When the clothes are placed in the washing machine, go to the tub, move around - upset - into soapy water, rinsed with clean water, and eventually disappear from them before they are ready to remove for drying. The whole process works because the bathtub is able to move back and forth, upset and then spin clothes in the machine. The bathtub is able to move because it sits on bearings, a group of small steel balls that allow it to rotate freely.

The machine bearings do not choose in the machine, but are held in a round track with a hole in the center for spindles of the bathtub. This whole part - bearings and frames that hold them - are usually also referred to as bearings. The deposit of the bearings is suitable for the niche at the bottom of the tub. The whole bath rests on the bearings.

Many times there are no apparent problems, because the bearings of the washing machine cannot be seen without the dissembludol part of the pad. There are several symptoms that can help identify the bearings problems. However, there are often several possible causes for each symptom,So the presence of a specific state does not necessarily have to be a sign of bearing failure.

One of the most common symptoms of imminent bearing failure of the washing machine is the loud noise during any cycle of washing or spin. The noise may be a high scream, or it may sound more like loud friction or grinding. In general, noise is louder over time, as the bearings wear and become unable to support the bathtub. Finally, the washing machine stops agitating or spinning at all.

Another extremely common feature of problems with the bearing of the washing machine is the presence of water in the bath after the cycle of spinning. The tube usually rotates and the centrifugal force pushes all the water from the bathtub, where Ddešť over the drain hose. Poor bearings do not allow to spin freely with a washing machine, causing it to retain water at the end of the spinned cycle. This problem can be something as simple as a blocked drain hose so that the snake should be checkedICE and pad should be monitored to see if the bathtub is moving during washing during the washing cycle or whether it seems to be binding.

Bearings

The washing machine bearings are usually good for at least five years, often up to 10 or more than they must be replaced. In many cases, the home maintenance man or repairman can repair the washing machine simply by replacing bad bearings and associated seals, after which the machine usually provides many years to service. Use a service manual as a guide before trying to repair the houses. Many such manuals can be downloaded from the manufacturer's website.