What is the bow?

The

bow drill is a simple device made of wood and rope, which is generally used to start fires. Thanks to its simple design and use it has been used for ages for many cultures and civilizations. Although it is primarily used to start the fire, it was also monitored back to the dentistry and practices of wood processing. The drill consists of five basic components: four pieces of wood and one rope length. These are used to build a drill or spindle, vertically, so that you can wipe back and forth. The process creates friction that creates sparks and then shoots.

Historians follow the budding until the fourth millennium BCE, where evidence shows that it was used by Babylonian and Egyptians. Throughout its lengthy history, it is used as an ancient tooth tool - for drilling holes to install the basic braces - as well as a woodworking device for drilling precise holes. Although the ancient, the bow has survived by its use. Darcons even at a modern age can be very useful for the outdoors;The ability to cause a fire equipped with nothing but a knife, a rope and available wood can determine the difference between life and death in the wild.

You want to create a bow, you need to start with a rope length and a good knife outside. For the bow section, find a piece of slender wood, such as a small limb or tree. Take the rope and attach it to each end of the bow. Furthermore, find a flat piece of wood, such as a solid piece of thick bark. This is called tribute. Solve the groove on one side of the holding and place the holding on the ground with a groove facing up. Next, create a spindle using a knife. A firm branch will do it, no more than a few feet (about half a meter) in length and at one end it was limited to a sharp point. The spindle will be placed vertically, pointing down, at the top of the tribute. The last piece of wood is required: hand holding. Holding the hand is used to hold the spindle in place, by placing the flat over the upper part of the spindle and holding the hand. AllThe components are now in place. Furthermore, the rope must be skidded around the spindle, so when the bow is pulled back and forth, the spindle turns.

Once everything is ready, the user can kneel down and hold the spindle on the spot with one hand, using the other hand to pull the bow back and back in an intense way. The rotating spindle creates friction at the base of the hold, which eventually generates enough heat to start the fire. The ignition should be placed on the base of the hold, so the fire must be expanded somewhere. Once the fire is created in the holding, the riding drill can even raise the holding and place a small fire in a larger pile of ignition and wood.

Some prefer to use flints and knives to start fires in the wild. Their flint above the bow is that it can cause in rainy situations. When the knife is hit through the flint, it always creates sparks. However, there is a chance that the surrounding Tinder will be too wet to hold a spark and create a fire. However, Flint and Knife may serveLive as a better versatile firefighting starter, while the bow is useful in a situation where there is only a knife at hand. There are also other alternatives to a shelter, such as creating a fire plow that also uses friction to create a fire.