What is the skipped texture of the Trowels?

Skip Trowel is a finishing technique used to add decorative attraction to walls and ceilings. It serves as a compromise between the smoothness of standard plasterboard and bumpy texture popcorn or orange peel. The Trowel texture can be applied to plasterboard, stucco or plaster and can be used in the interior and outdoors. The finishers create this texture by skipping a spatula over the surface as they apply stucco or joint compounds, so some parts are filled and some bare. This surface treatment is naturally inaccurate, resulting in a unique difference in its appearance based on the region or user.

On a gypsum wall or ceiling, you can skip the texture of the trowels on a traditional turning system or modern veneer plaster. Workers begin with the dilution of standard joint compounds with water and then apply it to the wall using a painting cylinder. Then they drag wet compounds and finish the knife and first pull it out in one direction and another. By draging back and forth while mSlide the angle and pressure, the finishes create a highly texture of the skip field.

The

process of applying the texture of the Trowel skip to the stucco wall is slightly different. Users first use a standard stucco coat to cover the entire wall or ceiling. Once this coat has dried, it places a small amount of wet stucco on the edge of the spatula. By sliding this spoon on the surface, stucco can leave in some areas while others remain bare. This requires the use of exactly the right amount of pressure to allow the bed to slightly skip on the surface.

As well as other surface treatment textures, the Trowel textures offer many benefits to homeowners. It serves as an effective method of covering old or damaged walls. This texture can also mask the imperfections in the installation of plasterboard or plaster. Adds texture and depth to revive boring, smooth surfaces, yet remain fine enough to mix with decorationboth. The Trowel texture is also very versatile, allowing users to edit the texture and thickness to suit their preferences.

One of the primary disadvantages associated with this completion technique is its inaccurate nature. With a large amount of variation of the SKIP Trowel texture between different regions or installer, it can be very difficult to match the existing surface. This leads to expensive and difficult repairs, which may never look just like the original surface.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?