What is the toilet fill valve?

Within the tank in the toilet there is a filling valve toilets and controls water flowing into the tank. Connected to the float mechanism, the toilet filling valve is activated when swimming begins to fall in the tank. Once the water reaches its pre -set full level, the toilet valve closes and the water flow to the toilet tank.

made of plastic, the toilet valve filling valve is not subject to corrosion or rust; However, the scale and the mineral accumulation of hard water may sometimes cause the valve to not work. Most chemicals for cleaning the toilet in bowl can prevent this accumulation and maintain the toilet valve in the working condition for years. The correct float adjustment is critical for the long life of the toilet filling valve, because most of the broken fill valves are caused by incorrectly functioning floats. In order to replace the filling valve, the water must first be turned off on the water line. With water, the toilet can be flushed and exhausted from water supply. This gives enough dryIt will replace the toilet valve space and replace it with another valve. For users, it is a wise decision to replace the float mechanism and flaps simultaneously to prevent the system from re -draining.

Once the replacement valve is replaced, the water can be re -on. The float must be set to turn the water off when it reaches full level. The float can usually be treated by bending a metal rod that attaches it to the valve filling. To turn off the water flow, the float ball must be bent towards the water. This causes the valve to be filled earlier; On the contrary, bending the rod up allows the water to flow longer before burning the valve filling and the flow.

correctly operating the toilet fill valve will be the quiet ONCE tank has reached its full water level. Any noise or sound coming from the tank is a sign that water continues to flow from the filler valve. Usually thisThe problem will be repaired by a smaller float arm adjustment. Other reasons why the filling valve can continue to allow water to flow into the tank is to glue the flap valves or the incorrectly set arm of the arm. To cure this problem, users should make sure that the string let the valve closed completely.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?