What is the toilet seal?
The toilet or wax ring, as it is commonly called, seals the toilet to plumbing when it passes through the floor. The seal is important to ensure that water and waste water are not around the toilet seal and out on the floor. There are many reasons why the toilet seal may require replacement - deterioration of the bedrock, free toilet screws and wear over time are several most common. A thin metal plate is usually everything that provides a plumbing tube in place - the toilet is also attached to the floor with the same thin metal plate. The bolts are inserted over the plate pointing up and the toilet is located above the screws and lowered to the position. The toilet seal is located through the sewer pipe before lowering the toilet to the position. Once in the position, the nuts are thread on the mounting screws and the toilet is secured in place.
It is essential to reduce the toilet as much down as possible to prevent the sloping seal of the toilet or crush it on one side than on the otherThis could cause leakage. As soon as the toilet made contact with the toilet seal, the toilet is pushed down into the wax ring to achieve the correct seal. The seal, which is made of soft wax, corresponds to the base of the toilet, on the floor and plumbing and creates a seal.
over time the floor can become dry and fragile; This leads to the fact that the screws that were once tight have relaxed and even stretched without wood. This is a dilemma that many homeowners face toilets. The toilets are often released and fluctuated over time, and this can cause the toilet seal to break and leak. In most cases it is not necessary to replace the entire floor. Replacing wooden screws to different areas of metal plate and new toilet seals usually solve the problem.
The time itself can also be the enemy of the seal. The wax can dry and fragile for many years, leading to leaks. This type of escape may not show around the base of the toilet - can be found in the basement that escapes from the sewer tRubky. The replacement method is the same, and the most important step in any replacement is the overall removal of all existing wax before setting a new seal on site.