What is waxing iron?

Waxing iron is a special type of heating iron used to apply ski wax and snowboards. Before discussing about the types and use of waxing iron, it is important to understand the structure of modern skis and snowboards and why it is important to wax.

ski base. DNA of modern skis and snowboards is made of polyethylene, which have a very high molecular weight. This base material is dense, resists abrasion and has low friction. It is treated to absorb the wax and use easily with epoxy resin, allowing it to effectively shape the upper part of the skis or snowboard. It is on the market around the world like P-Tex, Isospeed or Durasurf.

Why wax? When ski or snowboard glides on snow, generated friction produces a very thin layer of water between ski and snow. This continuous layer of water creates suction and slows down skis. Ski wax and snowboard wax actually make skis waterproof and breaks a layer of water up to small droplets,that allow skiing to quickly and more precisely through snow.

waxing is an important aspect of maintenance and performance of skiing and snowboarding. Ski and snowboard wax can be a paste, liquid or molten hot wax. Paste and liquid wax are wiped directly to the base of the ski, but they wear quickly. The molten hot wax drips them to the ski base and then blesses into the base to create a smooth and longer permanent surface.

Hot wax is applied using waxing iron. Wax irons are more flattering and stronger than conventional irons and lack steam openings that now occur in almost all fabrics. Home irons can be used to apply ski wax and snowboards, but is not recommended. The temperature of the typical fabric iron cannot be controlled as exactly as the hot waxing temperature and the temperature through a relatively thin base of iron ttkanina significantly fluctuates. The exact and even iron temperatureIt is the only most important aspect of wax application.

Basic steps for waxing are:

1. Make sure the base of the ski or snowboard is clean, smooth and without damage.

2. Before applying wax, pre -play ski wax iron or snowboard waxing.

3. Apply the wax to the base of a ski or snowboard by melting the lower part of the waxing iron and dripping along the base in the line.

4. Reload and smooth the wax drops into a uniform coating from tip to tail with iron. Don't override.

5. When it is dry, scrape away the excess wax.

6. Repeat 2 or 3 times.

When buying waxing the iron, look for adjustable waxing iron that can be set to the heat required for different types of waxes. Iron should also have good corrosion resistance and heating plates to facilitate the use of wax powders. Expect to spend at least $ 80 per $ 100 (USD) for quality iron.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?