What is an expansion tank?

The

expansion tank is a small tank that is generally used to retain excessive water pressure in domestic and closed water heating systems. Thermal extensions are formed during water heating, which can lead to problems if the system does not have a way to store some excess water and steam. The tank itself is designed to have two separate parts, each side separated by a rubber membrane that allows the tank to push the steam from one side to the other without having to exclude it manually. The home applications of this device are also equipped to comply with the base regulations on drinking water, so that these tanks allow the correct heating pressure pressure without causing daily usability.

The basic purpose of the expansion tank is to ensure that the water lines remain full water and that the thermal expansion does not relieve the pipes or the heating units. As the temperature rises, the water inside the pipeline expands when the expansion tank is flowing. It allows the excess to slip into it. After a reductionTemperatures become water and leave open spaces in the pipeline. The expansion tank will again solve this problem by excluding a special amount of volume, which allows the water lines to remain full fluids at all times. The less air that has water lines, the better the system works.

Expansion tanks come in different shapes and sizes, as each specific system will require a specially designed unit. High temperature plumbing systems will require a different tank than cold systems. The more water that is promoted through the lines, the larger the tank must be to adapt to excess amounts. In most basic systems, the temperature in the tank cannot exceed a certain limit and the storage capacity of the tank cannot be more than the amount of the expected water along with the air that is already present in the unit. In principle, the tank must be sufficientThey are large to accept all excess water and steam, and at the same time allow enough space on the top for the air that is present in it.

All domestic and closed heating systems must be installed with a tool for release pressure and also to allow free flow of additional water back and forth, which is what the expansion tank is designed for. The plumbing lines today have much less air in the lines, the air that it used to allow space for expansion, so this tank was designed specifically with regard to it. To make this tank even more valuable within the heating system, it is also used by the air regulator, which allows the tank not only to do what it was produced for, but to release excess pressure and air from the system without having to have constant monitoring and maintenance. The extension tank is a way to move water back and forth via a plumbing system during expansion and contract, allowing the pipes to always remain full of water.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?