What flashes the chimney?

The

flickering of the chimneys prevents the water from entering the point where the chimney and the roof meet. Usually the flickering of the step is used along the edges of the chimney. Leaks often occur on the chimney when flashing fails. Damaged flashing may be cemented or repaired; However, it is also a sign that the roof may need to be replaced earlier than later. Before starting any roof project, it is important to wear the right equipment such as rubber shoes, protective gloves, tool belt and even safety harness.

Each chimney is different, so installing the chimney flashing is often your own project. In most cases, the chimneys are not connected to the house frame. As a result, when the house settles or moves, the chimney becomes an ideal place for leaks. Other times, it will be necessary to replace the chimney flicker, it includes when it is missing when it is rusty when the roof tar or the shingle is replaced by the Bear.

D The roof is composed of asphalt or wooden shingles, the blinking of the chimney can be replaced or installed by an experienced Do-Iourselfer. Alternatively, if the roof is made of slate or tiles, the flashing techniques are much more complicated and should usually be left to the professional. Before starting this advanced project, it is important to consider whether working on the top of the roof is a comfortable scenario. In addition, metal pieces must be measured, cut, bent and layered to fit firmly around the chimney and get rid of water; So, check your skills to make sure the project can be adequately completed.

hiring someone who replaces the flicker of the chimney can cost quite a lot; However, it ensures that the work will be done correctly and safely. Be sure to hire a renowned supplier and someone who is insured. This is the best voter less experienced craftsman or someone with fear of height, dizziness or other health problem.

for those whoThey want to go out and install a flashing chimney, there are at least two options. The metal business store should be able to cut a new flashing of the chimney by monitoring an old flashing formula or monitoring specific dimensions. The second option is to cut off the metal at home with a special cutting device for metals. Cutting metal at home is the cheapest; But it is also a bit of work and leaves enough space for errors for inexperienced metal cutter. After cutting the metal, the installation of the flashing of the chimney will take all day for an expert.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?