What is concrete waterproofing?
concrete waterproofing comes in many forms, including liquid, leaves, cement and Bentonite systems. Each has unique advantages, but Liquid is the most widespread. The application of concrete concrete concrete prevents water from penetrating the concrete. Water can erode concrete over time and require expensive repairs. In many areas, concrete waterproofing on any new concrete wall or structure is required to pass the inspection and meet the required construction code.
The most common cement waterproof is the type of liquid. This product is a strong substance that turns into a rubber coating that once applied to the outside of the concrete wall, where dirt connects to it. In order to correctly apply this type of waterproofing, cement must be cured and clean. The liquid is mopped or rolled on cement and is allowed to cure or dry. This is popular in the construction of the wall in the basement or any concrete that will be covered by the Earth. After drying and substance reached a rubber texture, dirt isfilled around the wall.
The liquid of concrete watermaking consists of large square leaves of very sticky rubber material. The leaves are placed against the concrete wall where dirt will be pushed around it. After the sheet is located, it is not possible to delete. This type of concrete waterproofing is not as effective as the type of liquid due to seams between the leaves. The leaves also have higher costs than liquid. The leaves provide more even coverage that remains a constant thickness when applied.
cementitive waterproofing is applied to concrete similar to a layer of mortar. The watermaster is mixed and applied to concrete in a strong uniform. This product dries and becomes like concrete itself. The disadvantage of this type of concrete waterproofing is that you do not bend or pull with concrete and is prone to cracking. However, this is the most pleasant product.
Bentonite types of concrete waterproofing come in cardboard leaves. BeTon waterproofing material, clay substance, is a sandwich inside the leaves. These leaves are attached to the concrete and the ground moves against the concrete wall. The water enters the cardboard material and causes the clay to swell its original size many times. This type of waterproofing is not as popular as other forms, because activation requires water and its coverage cannot be seen until the ground and water entered the material.