What is the vinyl composition tile?

There are two types of vinyl composition tiles, vinyl asbesto tiles (VAT) and vinyl composition of tiles or VCT. The production of the Azbesto vinyl tiles was interrupted in 1982 due to health problems associated with asbestos. Vinyl composition tiles are floor material used mainly in commercial applications. The floor is available in different finishes that offer different degrees of resistance.

The production process used to produce vinyl tiles changes vinyl chips to solid floor leaves. The heat is applied to vinyl chips, which is then pushed into the leaves. Furthermore, the machine cuts the leaves into the tiles. The most common size of the vinyl tile is a square square square of 12 inches (30.48 cm), which has a thickness of 1/8 inches (0.32 cm). The tiles are packed and ready to transport customers around the world.

During installation, a grid or formula is transmitted to the floor surface, usually with a chalk line. This grid is essential to duinstalling the ring when keeping the tiles in Ca throw straight and in their correct alignment. Other workers use the standard Trowel V-ribbon to spread the specific type of adhesive designed for VCT on the appropriate floor area. The tiles are then set in the place. After removing any excess adhesive, the weighted cylinder is used to develop the pressure on the floor to create a good binding.

Thanks to its durability and resistance to high abrasion, the vinyl composition tiles make the attractive and practical floor material for use in hospitals, department stores and other areas with high operation. Proper maintenance requires regular streaming and waxing the floor to help it keep its shine. Wax or surface treatment helps protect the floor from causing minor damage. The tiles that are damaged are simply removed and replaced by a new tile.

regularly must be used to remove surplusDirt, grease or grime. The machine rotates specifically the size of the pad that cuts up. Another process used in floor maintenance is stripping, which includes the application of chemicals to the floor to remove the layers of undesirable sealant and/or accumulation of wax. In this way, the vinyl composition floor can remain attractive and operated for many years.