What are the different types of microscope images?

microscopic slides are used to view samples through a composite microscope. This type of microscopy is illuminated by light and creates an image with high magnification and low resolution. Samples can be alive or dead and are mounted on glass or plastic microscope slides. These images come in different sizes and styles depending on the purpose and object that appears. Standard glass slides are one millimeter (1 mm) per and two tenth millimeters (1.2 mm) thick, but thinner slides are used with multiple high -performance microscopes. The slides are more expensive than the slides and are usually used without a cover slip. Cover slides, also called cover glasses, come in two standard thicknesses, number one and number two. The number one chutes are for higher resolution microscopy and have a thickness of 0.13 mm to 0.17 mm and the slides number two are 0.17 mm thick for more general use. Covering glasses are used to prevent microscopic touchesLenses that touch the sample and flatten and even from the water on the wet holder.

Wet holder is a common preparation of microscopes used to view sampling of liquid, live samples or any type of sample to maintain moist. To prepare a wet holder, a sample and a drop of water are placed on the straight side using a pipette or a drug drop. The cover glass is then carefully located at the angle at the top of the flat slip so that the water spreads evenly between the two slides. It is important to use the correct amount of water, as too little can crush or allow it to dry too quickly. Too much water can cause the cover to slip and can allow the live pattern to swim too freely, making focusing more difficult.

permanent microscope slides, unlike wet images, can be prepared before using the image and will only include dead samples. TrThe vale feed locks the sample to the resinous sealing created by evaporation of the solvent. There are several types of permanent microscopic images marked with different abbreviations. "WM" means the entire holder or the whole sample, "LS" means longitudinal cut, "CS" is a cross -section, "SQ" is the preparation of the squash pattern, "SM" means paint and "ST" is colored pattern. Colored organisms can be alive or dead, often easier to see and used in freshly produced slides and permanent slides.

6 This image of a special purpose has a printed grid on it, so the viewer can estimate the size of the observed sample. Although no longer commonly used, there are also images of transparent mica, as originally used in the Victorian era. Today, mica is sometimes used when the glass microscople PE is too dusty, scratched or causing too much glare.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?