Can I use a brand on CD or DVD?

Many people consider it appropriate to use a brand for CD or DVD for domestic media, but controversy persists during practice. It is a thin layer that protects the written surface that lies just below the label. In some cases, it can ink degrade long -distance protective coatings, resulting in a disk that will eventually bring errors. However, from the General Chatter in the Internet community, most people who use brands on the media would have no problems.

studies conducted by media sciences exposed to distinctive CDs from different manufacturers to 100 hours high humidity (85% relative) and temperatures of 140 degrees Fahrenheit (60 degrees Celsius). The results indicate that no single type of disk or marker ink did not complicate permanently better than another. All discs have deteriorated, and the result is that the use of marker on CD potentially reduces the life of the medium to an estimated 20 years. Media Scsamný IENCES points out that there are too many variables to offer definitIncorrect response.

Inkjet formulas are one of the factors in terms of using a marker on CD. Manufacturers constantly change their processes and materials. Chemical interactions between inkjet formulas and materials used in media production are unpredictable as such. Media sciences considered water -based inks of the safest, although some media packages recommend brand -based brands. In all cases, they use a soft, felt brand on CD or DVD. The pits should not be used because the sharp tip can damage the disk. Solvent -based inks, such as those used in permanent markers, can also be more harmful to some types of disks than other inkjet formulas.

"printable discs" have an ink absorption layer for printing ink Jet (available functions on some inkjet printers). The ink absorption layer is PADesigned to protect the designer plate and its coating below and added one more warranty for those who prefer to use a marker on a CD or DVD. Storage and manipulation of the media also affects his life. Small scratches, fingerprints and dust can cause the disk to be unreadable. Environmental factors such as maintaining a CD in the car, submitting them to thermal tips and moisture can also cause damage.

6 Sanford has a special Sharpie® range for CD and DVD. Other companies also produce CD/DVD markers. Dixon's Redisharp Plus! ® , Staedtler's Lumocolor CD/DVD MARKERS® and Memorex's CD Markers® There are several examples.

If you want to be more safer, you can write a brand on a CD or DVD on a bright internal disk hub. This does not allow much space, so some people use indexessesesty, the location of the code in this area. The discs are filled from the internal charge towards the edge. Once written, the disk darkens. If the disk is notFull, try to use a brand on a CD or DVD along the outer edge so that the ink is not placed above the data on the opposite side.

If you prefer labels, use those made for CD and DVD. Adhesives and adhesives on other types of labels can damage your media. In addition, a small label that is not designed to fit on the entire disk can not use it how it spins and creates fluctuations.

While countless disks have survived many years after it was marked with a brand, you may want to take special measures with domestic films or other materials that are irreplaceable. One option is to keep such materials backed up to an external hard drive with a USB port that can be easily moved from a laptop to an area or from a family member to a family member. If CDS or DVDs would ever fail, the original files will still be available for transmission to a new media.