What are the binoculars stabilized by the image?
Binoculary stabilized in the image are a telescope that contains a special technology that helps keep the image observed through the eyepiece before the shock. This task is accomplished using tools such as electronic gyroscopes, electronic processors and prisms filled with liquid. The pears have many of the same features as other traditional models, but they can be slightly larger, especially around eyepieces. The added volume is to accommodate all other technology that the telescope must have stabilized.
Electronic gyroscopes are one of the most common ways to work stabilized by an image to ensure that images do not have much in them, if at all, shocks. The gyroscope is powered by a small internal engine and can work even if the specialized telescope is strongly shaken. The mechanism that causes the gyroscope to react can take some time to find out its correct attitude. Therefore, the system may not be the best choice for those who are sporadically moving incompartment; For example, when stabilizing vibrations in a moving vehicle, they are the best. You
Manufacturers also use computer processors to stabilize images in binoculars. These systems use sensors that are located at different places inside the binoculars stabilized by image, and transmit information to the central processor. This processor then works to control the prism to prevent the image from shaking. They tend to work much faster than electronic gyroscopes.
Further use of system manufacturers is called Cardanese suspension. As the name suggests, this technique uses a prism filled with a liquid that is suspended, allowing a prism to move on the X and Y axis. Therefore, the prism is able to move in any direction in which they can be a telescope. Servermore, this type of system is very sensitive and stable. Unlike electronic gyroscopes, these telescope soIt does not need an external energy source to operate.
While all these systems can have their advantages over traditional binoculars, they are also more expensive than the average couple of telescope. For the same magnification and quality, the telescope can be far for magnification and quality. Depending on technology and brand, some may be even more expensive.
Another disadvantage of such binoculars was the weight. With other components, binoculars can be heavier than traditional models, which can be discomfort to the user holding them for a long time. The power of magnification and other materials used can also add to the overall weight of the models. However, as the technology proceeds, the added weight is lower than once.