What Is a Digital Clamp Meter?

A digital clamp meter is a meter used to measure the current of a running electrical circuit. It can measure the current under constant power. It is an electrical instrument specially used for measuring large AC current.

Digital clamp meter

Right!

A digital clamp meter is a meter used to measure the current of a running electrical circuit. It can measure the current under constant power. It is an electrical instrument specially used for measuring large AC current.

Chinese name

Digital clamp meter

Features

Measuring current

Measurement conditions

No power off

Features

Electrical instrument for measuring AC high current

The fork digital meter is a 33 / 4-digit fork digital meter with stable performance and safety. The whole circuit is based on a large-scale integrated circuit double-integral A / D converter and is equipped with an overload protection circuit, which makes it an excellent electrical instrument.

Can be used to measure AC and DC voltage, AC current, resistance, capacitance, diode forward voltage drop, circuit on-off, frequency and duty cycle.

The greatest convenience for measuring AC current is to simply place a wire under test in the fork. And the frequency range of the measured AC current can be as wide as 1kHz.

The display of the meter is equipped with a backlight, which makes it easy to work in low light conditions.

AC current digital clamp meter

Comply with IEClOlO-1, IEC1OlO-2-032 international standards

· Double insulation, 600VCAT, pollution degree 2

· Overmolded housing

· Display: 6000 digital display

AC voltage and current true rms (MS2026R only)

· Manual / Auto range

Data retention function

·maximum value minimum value

· Backlight

· Clamp head lighting

· Auto power off

· DC voltage: 6/60 / 600V ± 0.8%, 1000V ± 1.0 %%

· AC voltage: 6/60 / 600V ± 1.2%, 700V ± 1.2%

· AC current: 60OA ± 2.5%, 100A ± 3.O%

Resistance: 600 / 6k / 60k / 600k / 6M ± 1.0%, 60M ± 5.0%

Capacitance: 600n / 6 / 60 / 600 / 1000F ± 4.0%

· Frequency measurement: 40Hz-lOOKHz ± 0.l%

· ADP measurement: 600mv ± 3.O%

· Continuity test

· Diode test

· Caliber head diameter: 40mm

· Size: 225x86x33mm

· Power: 1.5V / AAAX3

· Weight: about 320g

AC and DC current clamp meter

Auto / manual range

Non-contact voltage detection

Home button

Continuity test

Data retention

Leakage current clamp meter

Low-pass filter function / clamp head frequency measurement function

Diode test / Continuity test

Maximum measurement / relative measurement / data hold

Auto range / manual range / backlight / auto power off </ p>