What is the TV driver?
TV The binder is a device that is able to move the TV so it does not work most of the room and the TV can be hidden when users do not follow it. Most television drives cause the TV to come from the counter or from behind the table, but there are also units that cause the ceiling to fall out from the ceiling. This can only be done correctly for a flat screen TV, because other sets are difficult to equalize and weigh more. Installing the TV controller is very easy to do; Linear guards of the drive keep the TV straight, while the gas spring and the controller move the TV. The gas spring that supports the weight of the TV must have the same thrust as the control arm.
For a TV controller, it is possible to have a TV that can be hidden at any time. Most drivers are made to push the TV up and out from behind the surface, because it is much easier to install; It also places much less emphasis on the driver because it must maintain weight only when the TVOR discovers. Some television drivers may hide on the ceiling, but there must be a hole in the ceiling for television and there is a better chance that the TV can fall and hurt someone.
large box -shaped TVs are not suitable for use with a TV controller due to the weight and size of the TV. These TVs are heavier than a flat -screen models, which means that the driver must work much harder to lift and hold the TV. The larger TV size means that there would also be a large part to hold the screen, and its shape would make the balance more difficult. This means that flat -screen TVs tend to be the only model used in drives.
Installing a TV driver is quite simple and most people can do it without any problems. Linear guards are located on the sides of the TV to keep it straight, and the drive is connected to the lower center of the TV. GasThe spring is also required to irrigate the TV.
Some TV controllers come up with the Apply Spring, while others don't, require the user to buy separately. The gas spring must have the same draft or the amount of expansion as the driver. If it is too large, it will push the TV out of the controller; If it is too small, it cannot properly support weight.