What Is a Water Damage Sticker?
Water stickers are stickers that can only be used after being soaked in water. It is a new transfer technology that uses water as a carrier to separate the pattern from the backing paper and transfer it to the substrate to realize the principle of indirect printing.
Water sticker
- Chinese name
- Water sticker
- Definition
- Stickers that can only be used after being soaked in water
- Features
- Supported on the surface of any arc and curved object
- Application
- Car supplies, etc.
- Water stickers are stickers that can only be used after being soaked in water. It is a new transfer technology that uses water as a carrier to separate the pattern from the backing paper and transfer it to the substrate to realize the principle of indirect printing.
- 1. The model water sticker should first be cut from the entire paper and immersed in warm water
- Its function is like a mild dissolving agent that can slightly "dissolve" the water sticker. This water sticker
- The so-called water sticker is actually a brand new transfer technology. General traditional printing or transfer or pad printing is helpless for complex-shaped workpieces. The special function of water transfer is not only easy to deal with this problem, but also can be applied to different materials. Greatly increased the added value of the product. Its characteristics are:
- (1) It can be attached to the surface of any radian and curved surface, regardless of whether the pad printing can be done, it can easily do the job and can completely replace the pad printing.
- (2) Water sticker screen printing: The product has bright color and thick ink layer. The pattern screen has a strong sense of subject, which is unmatched by other printing methods.
- (3) Water sticker offset printing: It is mainly used for patterns with complicated dots and gradient effects.
- (1) Automotive supplies: various appearance patterns of automobile models, dashboards, control panels, tissue boxes, tea cup holders, tape holders, rear view frames, handles, car locks, etc.
- (2) Electronic products: telephone, pager, video recorder, television, air conditioner, speaker, remote control, mouse, U disk, etc .;
- (3) Room supplies: sofas, coffee tables, kitchen cabinets, chandeliers, ashtrays, vase decorations, containers, etc.
- (4) Goods for daily use: glasses, glasses cases, pens, pen holders, desk calendars, art photo frames, rackets, cosmetic cases, etc .; (5) Interior building materials: doors and windows, floors, wall stickers, etc.
- (1) First remove the release paper, and then cut the desired pattern.
- Finished effect
- (2) Soak in room temperature water until the pattern can slide on the surface of the water paper (about 5-10 seconds).
- (3) Take it out and drag it to the desired position of the object, and use a soft cloth or paper towel to wipe off the bubbles and moisture evenly.
- (4) It can be fully air-dried (about 4 hours), or it can be baked in the oven for about 30 minutes and the temperature is about 75 degrees, and the transfer is completed.
- (5) If another layer of varnish is sprayed on the surface, it will greatly improve regardless of any effect. It can be used without spraying, but the adhesion is poor.