What is the XLR connector?
The XLR connector is the three -point end of the plug and a socket cable used for network professional sound equipment. It fulfills the obligation as an industrial standard for analog and digital audio elements such as DMX512 cables and components. The first design from Canon, takes its name from the original X connector, which was later modified using the latch (L) and rubber seals (R). This connector is most often used for analog sound and locked into its port with a balanced connection. The ground pin adds safety and reduces undesirable interference when it is involved during a live performance. Although it can have up to seven pins, the most common are three pins. It can be mounted on a cable or chassis, as well as the sound components mounted on the stand. The finger width, the XLR cylindrical connector is attached to the cable, and may contain pins or female sockets, as with panel connectors. The three -pin with three XLR pin uses a balanced connection to minimize undesirable electrical contact with high -pipetinged equipment.
Usually the first pin represents the chassis soil and usually makes contact in front of other pins. The second pin represents a positive polarity terminal; This is a hot pin. The third or cold pin is called a return terminal. Together, these two pins are a source of sound signal. In front of this innovation were common two -wheeled connectors.
One of the most common applications of the XLR connector is to connect microphones to public addresses. Technologies, such as the capacitor microphones, may require the use of the on -board battery for power. The XLR connector can supply this voltage, referred to as phantom power. This power supply is usually powered by the first or ground pin. Such versatility enables the widespread use of this connector to minimize potential damage to the sensitive microphone device.
Other products designed for the XLR connector standard mayAttop chassis and right angle style plugs. Like a direct connector, the connection of men or women may have. They can also vary in the number of pins.
Quad connectors are often used for international headsets and types of five pins are used in two-pounds or stereo microphones and headsets. Six -round types correspond to dual channel systems of intercoms. Seven -wheel connectors serve remote controls for fog machines and other analog components. Using the XLR connector components can help ensure trouble -free audio settings and safer switching of noiseless components.