What is the maintenance of the fault?

Maintenance of decomposition includes the repair or replacement of the device and components after they have failed. This type of management strategy may be in contrast to preventive and predictive maintenance, which is designed to prevent the device from failing. Access to the maintenance of disintegration is usually used if the failure is unlikely to lead to injuries to the workplace or excessive downtime, although the costs associated with emergency repairs are often prohibited. The disintegration policy is sometimes introduced if it has a device or company scheduled to close or stop operations, especially if there is no plan to continue using the device afterwards.

There are many different ways to access the maintenance of equipment and equipment. Preventive and predictive maintenance are two methods designed to avoid catastrophic failure. Inspection is usually carried out regularly in the case of preventive maintenance, while predictive approach can allow forms to be planned on the basis of previous deaper levelsor. By performing regular checks or replacing the components before they break, catastrophic failure can be prevented.

In contrast to preventive approaches, maintenance of disintegration is a reactive policy. This approach avoids the costs associated with inspections and preventive repairs merely allowing components to fail and then deal with the problem. The term "run-to-folium" is also used to describe this approach to maintenance, because this is what the device can do. The device will usually be lubricated and, within this type, the maintenance principle gets more attention, although it is usually the extent of any maintenance operations.

There are a number of costs that can be associated with the principle of disintegration. Because any component may fail at any time in this approach, MUST maintenance staff Be prepared to perform many different types of repairs. This may include maintaining the reserves of spare parts for KEven a piece of equipment on the spot, or otherwise pay for transport to the new components because the old fails. Usually the costs are also associated with downtime, so this access to maintenance is not suitable for any business operation that would suffer large cash losses in the event of a sudden failure of any device.

The disintegration policy is sometimes introduced when the closure of the device or business is scheduled. This is often a calculated risk, as the decision assumes that the device will continue running long enough to close the equipment. If there are plans to cancel the equipment at the end of the period, costly preventive maintenance can be considered unnecessary.