What Is a Fluid Warmer?

Medical liquid insulation box is mainly used for heat preservation of various liquids used in medical institutions. Generally, it is divided into different standards such as freezing (-18 degrees Celsius), refrigerated (2-8 degrees Celsius), and cool (0-20 degrees Celsius) according to actual requirements. It is cooled by placing ice rows and ice boxes inside. According to the requirements of the State Food and Drug Administration, the box must have functions such as data recording, over-limit alarm, and data printing. Generally, it is realized by adding a temperature and humidity recorder to the ordinary box.

Medical liquid insulation box

Medical liquid insulation box is mainly used for heat preservation of various liquids used in medical institutions. Generally divided into freezing (-18 degrees Celsius),

Mainly used for various liquids used in medical institutions, such as intravenous injection

The thermostat is composed of a refrigeration system, a heating system, a control system, a temperature system, an air circulation system, and a sensor system. The above systems fall into two major areas of electrical and mechanical refrigeration.

Major health and medical institutions, such as: hospitals, health centers, clinics and other health institutions.

The principle that the temperature inside the box is constantly controlled at 2-8 ° C is that the cold storage ice bank in the box absorbs heat to resist the heat transferred into the box from the outside. The temperature of such a box must not be set arbitrarily, because there must be a refrigeration part (electronic refrigeration tablet or compressor) at any temperature setting, and the electronic refrigeration tablet ^[1]

(1) The technical parameters such as the measurement range, accuracy, and resolution of the temperature measurement system can meet the management needs. It has the functions of uninterrupted monitoring, continuous recording, data storage, display, and alarm.

(2) The temperature of the cold storage and refrigerated truck equipment is updated at least every 1 minute, the real-time temperature data is automatically recorded at least every 30 minutes, and the real-time temperature data is automatically recorded at least every 5 minutes during the transportation process.

(3) When the monitoring temperature reaches the set critical value or exceeds the specified range, the temperature measurement system can realize audible and visual alarms, and at the same time realize communication methods such as short messages to send alarm messages to at least 2 designated personnel. ^[2]