How can I choose the best turning belt?
You can often choose the best lathe belt by considering several important facts before shopping a belt, such as the type and size of your lathe. Type of lathe - metal or wood - can also change the best belt you can choose. The type of materials that are constructed by a turning belt can vary highly and can often be the difference between a good belt and the best belt belt. You may want to choose a belt specific for your lathe, because generic belts are rarely of the same quality as your own lathe band.
Common lathe is produced in flat design and configuration. This allows the belt to easily slide from one level or chain wheel to another to change the lathe operating speed. Towing hills are usually flat, graded drums that provide a smooth and flat surface for the lathe strip. While a clean rubber belt can be cheaper, it's rarely the best belt belt. TheNeji belts are commonly made of reinforced rubber MateRial that resists fragmentation and stretching.
Belty with Kevlar® reinforcement are usually considered the best several lathe manufacturers. This type of turning belt ensures long -term durability and at the same time enables frequent changes in speed and prolonged heavy use without stretching. If you are looking for a metal lathe, you usually want to choose an oil -resistant belt, because oil is a very common product when metal rotation. With less belts, a small amount of oil can lead to the belt slipping and the unpredictable speed of rotation stemming from slipping. When replacing a metal turning belt, you will often be best satisfied with the manufacturer's belt of the original type,
wooden lathe is not as sensitive to the type of belt used as a metal lathe. Common wood lathe uses type V belt and often can be operated with the original belt with a very low price and low quality belt. In search of the bestYou can consider the type strip available for your lathe. This type of belt will usually resist many speed changes and prolonged operation at high speed without showing any signs of wear. This belt style seems to have a thin cloth or fiber cover on the rubber belt and usually survives an ordinary rubber belt on the lathe.