What Are Alligator Shears?

Crocodile shears are alligator-type shears, which are a type of metal shears.

Crocodile scissors

Crocodile scissors

Crocodile scissors suitable for

(1) Hydraulic drive, easy operation and simple maintenance.

(2) Working knife edge length: 400mm, 600mm, 700mm, 800mm, 1000mm, 1200mm, and 8 levels of shear force from 63 to 400 tons. Shears with a cutting edge of more than 700mm are particularly suitable for cutting scrapped cars.

(3) No foot screws are required for installation. Diesel engines can be used for power without a power source.

(4) The equipment adopts hydraulic transmission. Compared with mechanical transmission shears, it has the advantages of small size, light weight, low inertia, low noise, stable movement, convenient operation, flexibility, large cutting section, and convenient adjustment of scissors mouth. Safe operation and easy to implement overload protection.

1. The equipment should be operated by designated personnel, and others must not be used arbitrarily without training.

2. Before driving, check whether all parts are normal and whether the fasteners are firm.

3 It is forbidden to cut unannealed steel, cast iron, soft metal, thin workpieces, workpieces less than 100 mm in length, and workpieces longer than the length of scissors.

4 During operation, the human body is not allowed to approach the transmission part and the knife edge of the equipment, and the safety of the surrounding personnel should be paid attention to prevent the material from being lifted and hurting people. When cutting, the material should be cut as close to the inside of the knife as possible. When cutting short materials, do not use hand-held workpieces to feed, use clamps to feed.

5. When the equipment is running, the operator must not leave the post without authorization. When the work is completed or temporarily leaving the post, the power supply should be cut off. At the same time, the machine should not be repaired or touch the moving parts with the hand.

6: The lubrication points of the machine should be filled with lubricating oil at least once per shift.

^[1]