What are the screw cutters?

screw cutters are tools for cutting heavy consumption, which are designed to cut very thick materials. Examples of these materials can be heavy steel wire, thick metal screws, padlock, nails, screws, small trees, branches and more. The screw cutters are available in a wide range of shapes and sizes that are designed for different purposes. These hinges are there to maximize the amount of force on the shoulder blades by increasing the lever effect when the handles are compressed. In this way, they are able to cut strong and rigid materials with relative ease for tool users. Many screw cutters are designed with an adjustable screw set to adjust the amount that the handles must be closed for the blades to contact each other.

The blades and jaws of the screw cutters are usually forged from very hard metal alloys, because the materials that are made for cutting are also usually very heavy. The shapes of the blades may also vary; For example, shear blades may be nand one side of the flat for cutting on flat surfaces. Shear blades are designed as a typical pair of scissors and can be used to cut softer metal cables and wires.

Cutting manually through heavy materials can be difficult with these tools. One solution for cutting heavy wire is to turn the blade handles back and forth in cutting, which often helps. If this is not enough, it is probably necessary to use a larger set of screw cutters to increase the amount of use. It is never advisable to cut a live electric wire with screw cutters, even if they are insulated.

Although the screw cutters are designed to make it easier to work on cutting heavy materials, the user often requires the user to apply quite a little power to the handles. The length of the tools usually ranges from 12 in (0.31 m) to 42 inches (1.07 m), from the end of the jaw to the end of the handle. Smaller versions are known as mini screw cutters andThey can be used for nails or wires. At the other end of the spectrum are cutters of hydraulic screws, which are designed to cut heavy or dense materials with motor machines when the human power simply does not "cut" it.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?