What Is a Pipe Cutter?

The principle is to cooperate with the gas-push oil type. The electrical system controls the movement direction of the air pressure system to push the oil circuit for linear back and forth motion. During the back and forth motion, the signal detected from the carriage limit is used as the basis to control and change. Air and oil movement, so as to achieve the expected cutting path.

Pipe cutting machine

The principle is to cooperate with the gas-push oil type. The electrical system controls the movement direction of the air pressure system to push the oil circuit for linear back and forth motion. During the back and forth motion, the signal detected from the carriage limit is used as the basis to control and change. Air and oil movement, so as to achieve the expected cutting path.

Chinese name

Pipe cutting machine

Foreign name

pipe cutter

Cutting range

75-1000mm

Cutting pipe wall thickness

3mm

Product description:

ExactV1000 pipe cutter super large ventilation pipe cutter cutting range: 75-1000mm. The wall thickness of the cutting tube is: 3mm. Detailed introduction of ExactV1000 pipe cutting machine

The automatic pipe cutting machine can automatically clamp, feed, feed, size setting, fixed number of stops and work measurement and other functions. The main circuit of the machine works with a PLC programmable logic controller. Automatic feeding, clamping and cutting system, accurate and fast feeding, cutting 10-50 times per minute. The counter can set the number of times of cutting, and it will stop automatically after cutting. There is no need for manual operation, higher mechatronics, and even one person can operate multiple units, reducing staff. The total counter can count the workload record for one day. The total pressure, front, back, and pressure can be adjusted steplessly to ensure that the workpiece is not pinched and deformed. Using a servo pipe cutter, the accuracy of the pipe length is guaranteed to be within plus or minus 0.05mm (the error is mainly generated on the steel pipe and the tool) ), The cut is shiny without burrs.

1. Check before starting

1.1 Check whether the saw blade is intact, and it should be replaced when there are cracks or cracks.

1.2 According to the specifications of the high-pressure hose, replace the corresponding positioning pins and guide sleeves.

2. Operating steps

2.1 Turn on the power and start the motor.

2.2 Insert the cut high-pressure rubber hose into the changed guide sleeve, pull the knife-shaped handle to drive the rubber hose into the saw blade, the rubber hose is cut off, and when the slide is reset, it is pulled back to its original position by two tension springs.

2.3 Insert the inner hole of the cut hose into the positioning pin shaft. When the saw blade rotates, make a slit at the place where the glue is to be peeled to ensure that the rubber pipe has a good glue breaking effect.

2.4 After work, the power must be cut off.

There are so many things in the world, and the existence of everything is not invariable. The pipe cutting machine industry in China is no exception. It is either progress or backward. So how to improve the development of this industry? This has become a common concern of pipe cutting machine manufacturers.

Nowadays, the paper tube machine, web paper slitting machine, tube cutting machine, paper tube machine are upgraded and replaced by Japan, which is leading the way, making a lot of dollars in this field. Southeast Asia's four little dragons also followed Japan, and made great achievements in the manufacturing of packaging machinery and equipment and production lines. In the European Community, the pace of upgrading packaging machinery and equipment and production lines in Italy is much faster than that of other member states.

So where did they improve? Update is key!

The replacement method is to replace local parts, components or critical components and key technologies, so as to achieve the purpose of replacing a unit, so that the original packaging machinery equipment or production line production capacity, performance, efficiency, models and assembly methods, etc. Get updated. In this way, most parts and unit parts are reused, which not only improves the value of equipment, but also saves raw materials and a large amount of labor, and reduces costs.

This development trend shows that paper tube packaging equipment, paper tube machines, web paper slitters, tube cutting machines, paper tube machine equipment, spiral paper tube machines are becoming more and more standardized, serialized, integrated, assembled, Development of online models. Civil and military high-tech will also enter the entire packaging machinery and equipment field more and more widely. The fierce market competition will undoubtedly accelerate the upgrading and technological transformation of paper tube packaging equipment in various industries.

1. Spindle speed must be changed after stopping. Gears must be fully engaged during shifting. When the machine is found to be abnormal, stop the machine immediately for inspection.

2. Before cutting, adjust the tool and clamp the work. The length of the clamping area must not be less than 50 mm. The parking baffle must be fixed, and work can only be carried out after a test run of clamping, loosening, forward and backward.

3 When the machine tool is rotating, no part of the human body should touch the transmission parts. Cuffs must be worn during operation, and gloves are strictly forbidden to work. The human head should deviate from the cutting direction.

4 When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, it must be stopped.

5. When cutting the pipe head, prevent the pipe head from flying out and hurt people.

6. When the long material pipe is put into the material rack and the lead wire is loosened, measures should be taken to prevent the pipe from rolling, impacting and crushing people.

7. When using a grinding wheel pipe cutter, check the grinding wheel sheet for defects, cracks, moisture, and whether the power cord is reliable.

8. The dust removal device of the pipe cutter should be intact before cutting.

9. No one should stand in the direction of workpiece feeding and discharging.