What is the different type of pipe supply?
Installing Top and air conditioning pipes requires a number of pipe supply. These channel supplies are most often made of sheet metal. The main line of the trunk is a rectangular pipe and is connected together with slides and units. Pipe hangers can be made of 1 inches (2.54 cm) of sheet strips. Plenum is mounting used to connect this main line line to the furnace. These branches deliver air to each registry opening. The branches are usually rigid, round tube, but can also be made of flexible glass channel of glass fibers. They are connected to the main line line with take -off. At the end he has cards to bend inside the pipe. This keeps the take -off safely in the pipeline. When using flexion pipes, it is necessary to use nylon pipes straps to ensure the take -off.
Parts for the branch supply will be launched to each of the registry opening. In order for the pipe to be aligned in the right place or to avoid obstacles on its way, the elbows or compensation may be necessaryCE and sometimes it is necessary to use a reducer to change the round channel to a smaller pipe size. Wye can be used to supply air from one branch to two holes. The tee cap closes the end of the piece of the round tube. The boot is nailed to the opening and the bond is attached; The register is then inserted into the boot.
Back air pipe uses the same metal pipe supply. Sometimes, in an effort to reduce costs, the pipeline is not used for all return air; Putting is used instead. The coating material is either a metal metal or some type of cardboard with a foil that is installed through the nasal space and the Stud space. This creates a tunnel for passing back air. The return of Air elbow is usually used to connect to the backfill to the furnace.
To achieve a balanced balanced and cooling system, additional pipe stocks may be necessary. Manual or electronic shock absorbers can be inserted into the pipe to regulate the air flow. All joints should be sealed with a special pipeBím or glue. The special aluminum tape also works well, but do not use adhesive tape. The pipe should be closed as assembled.