What are the different types of laser cutting systems?

In industrial laser machining, there are many different types of laser cutting systems for different types of materials. Laser cutting is preferred over mechanical cuts for thick flat sheet metal materials or precise machined parts are required. While lasers used in welding, such as Nesmumium (ND) lasers, can be used in laser cutting, the most common type of laser is carbon dioxide laser (CO _{2 ). Most industrial laser cutting machines have a material table and a laser head and these parts are assembled in three basic configurations: moving material, flying optics and hybrid systems. Generally, ND lasers are used for applications such as boring holes or engraving metal, as well as welding. Lasers are generally used by 2 lasers, because the laser is stronger and capable of cutting materials.}

Laser of carbon dioxide used in laser cutting systems is thus named because the amplifier chamber where LaSER produces, filled with carbon dioxide gas. Industrial what _{2 laser cutting machines usually produce a laser, which is a fraction of a thick millimeter and can reduce the other thickness of the material depending on the machine configuration. There are three configurations among the industrial laser cutting machines.}

The first configuration of the machine used in laser cutting systems is called moving material. This configuration includes a table of material that moves while the laser head is held at a fixed point. The laser carriers with moving material are most commonly used for precise cutting of a thick flat sheet. These types of laser cutting systems are also equipped with special accessories that remove the molten material.

Flying opticsystems laser cutting are configured by the opposite of moving material systems in that the material is fixed while laser or laSry moves above him on two axes. These types of laser cutting machines are often more expensive because they can have more than one laser head, which requires more electricity. Optics flying systems often require careful calibration and a trained trigger for starting.

The third most common configuration in laser cutting systems is known as a hybrid configuration that combines the previous two. In general, both the laser beam and the material can move. Laser hybrid systems are a popular laser cutting industry because they can be more effective in using and cutting force.