What are the different types of refrigerant equipment?
The
cooling technician and cooling techniques work with different refrigerant devices and gases to perform tasks. The refrigerant device is sometimes called heating, ventilation and air conditioning (HVAC). The devices used are grouped into two main categories: refrigerant charging devices and refrigerant recovery devices.
Refrigeration charging is used to charge a new cooling system or recharge the old system that has lost its ability to provide the right cooling function. This cooling device is usually very basic, consisting of a breakup, a valve and a hose with a connector that fits into the input port of the cooling system. The meter set is connected to the tank that holds the refrigerant and the valve is open to charge the system. Thermometers are used to monitor the air temperature from the cooling units and diagnose problems with the system. The leak detection and dye detection devices reveal areas of the system where the leakage of refrigerant can leak. Vacuum pump is a tool used in the serviceRunning units to remove air or humidity from the system before service to avoid damaging the system. The refrigerant identifier can also be used to determine exactly what type of refrigerant gas was used in a machine of unknown origin.
Recovery Recovery Devices are used to obtain refrigerant gases before the system is eliminated from use, work on cooling system or recharging of the system. This type of refrigerant is designed for a specific type of refrigerant gas; Mixing gases can be dangerous so that it must be kept separate. This type of refrigerant equipment is commonly observed in automotive repairs, where it is used to clean the automotics before the unit service.
Because some refrigerant gases are extremely dangerous, both for equipment and environmental operators, the use of refrigerant and some gases is carefully monitored. These gases can cause frostbite in contact with the skin and nIn the presence of an open flame, it turns into deadly poisons. Different types of refrigerant gas should be used in the same system and most gases must be regenerated from a system for refrigerant recovery devices before it is removed or destroyed.