What Is a Cardboard Baler?
Carton packer is a new type of advanced pneumatic packaging machine. Mainly used in carton enterprises and paper packaging production enterprises. Carton packing machine is suitable for carton packing, paper packing, parcel letter packing, medicine box packing, light industry packing, hardware tool packing, ceramic packing, auto parts packing, daily chemical packing, stylistic packing, component packing, aluminum material Packing and packing of various sizes and other goods. It has a wide range of uses, regardless of the size of the package, and can be packed without adjusting the machine. The machine is a mechanical structure, some of which use imported parts, the rear blade is stable and reliable, and easy to adjust.
Carton packer
- Chinese name
- Carton packer
- Category
- Pneumatic packaging machinery
- Scope of application
- Carton companies and paper packaging companies
- Function
- Carton packing, paper packing
- Machine weight
- 290kg (gross weight) / 240kg (net weight)
- Carton packer is a new type of advanced pneumatic packaging machine. Mainly used in carton enterprises and paper packaging production enterprises. Carton packing machine is suitable for carton packing, paper packing, parcel letter packing, medicine box packing, light industry packing, hardware tool packing, ceramic product packing, auto parts packing, daily chemical packing, stylistic packing, component packing, aluminum type materials Packing and packing of various sizes and other goods. It has a wide range of uses, regardless of the size of the package, and can be packed without adjusting the machine. The machine is a mechanical structure, some of which use imported parts, the rear blade is stable and reliable, and easy to adjust.
- 1. Projector group 2. Motor 3. Electric heater 4. Operation panel 5. Bow price 6. To pulley 7. Brake lever 8. Belt disc 9. Pulley 10. Left, center and right blades 11. Chain 12. Stop Arm 13. Full-automatic heart group 14. Left-blade cam, middle-blade cam, right-blade cam, pallet cam 15. Spacer ring 16. Induction block 17. Upper and lower pallet 18. Guide arm 19. Left and right guide block 20.Brake discs, etc.
- High and low
- 1. Continuous bundling mode: No need to operate any switch, the machine is continuously tied at a set interval, which is suitable for mass production flow operation.
- 2. Manual bundling method: Each time you press the bundling button, bundling once, it is suitable for occasions with relatively slow production speed or scattered bundling.
- 3. Automatic strapping method: (This series of balers have the most extensive market) There are the following operating methods:
- a. Ball switch: The ball switch is set on the work surface, and the object to be bound moves on the work surface. When the ball switch is pressed down, it will be automatically tied.
- b. Foot switch: Each time the foot switch is pressed, the object is packed once.
- Using the brand packer technology, it is now designed as a dual-circuit control of the whole machine, which is more stable and reliable than the previous single-circuit control performance. The dual-circuit control reduces the internal load of the machine's electrical board.
- However, due to the wear and tear of the parts during use, poor lubrication can cause damage to the parts, which may increase the occurrence of faults and accidents, so it is very important to quickly find faults and eliminate them. Don't call on the factory for a glitch, and earn valuable time and money.
- The following is a list of several prone areas and repair methods.
- Malfunction: Cut the steel strip continuously
- Causes: 1) The cutter is worn or faulty
- Maintenance method: check
- 1.Remove debris or dirt from the machine once a week
- 2. Once a month, do the cleaning and maintenance of the upper slide, the middle knife and the front ejector mentioned in the previous section.
- 3. Once every three months, add oil to all (shaft, core) and bearings after doing the above two maintenances.
- 4. Replenish the oil in the gearbox of the reducer once every two years.
- 5. Note that several parts must not be refueled: a send back with roller. b All belts. cSlipper and surrounding.
- 6. Don't add too much each time when refueling, so as to avoid malfunction of the micro switch due to oil immersion.
- Suitable for bulky and heavy packaging
|
|
|
|
|
|
|
|
|
|
|
|
|
|