What is the compressor pressure switch?

The compressor pressure switch is an electric switching device sensitive to the control of the air compressor operation. The main function of the switch is to start the compressor when the pressure in its ordering tank drops below the set low point and stops it when the pressure reaches the pre -set maximum. This allows the compressor to maintain a constant business charge in the system, which is the basic criteria for industries that are strongly dependent on compressed air. The compressor pressure switch is usually mounted on the compressor assembly or in another easily accessible location, while the compressor control circuit is connected through its internal contacts. The switch is built into the switchboards that allow the connection of one or more reference air hoses.

Many industries contain compressed air systems of various sizes, some of which are strongly relying on a reliable constant air supply. This is especially true for installations that use a large amount of tiresMatrics of the tool or participate in spray painting and sanding of sand. Most such industries have large compressors that run constantly to maintain a suitable charge. Built -in tubular systems then feed the compressed air into individual workstations or machines.

One of the natural problems with this type of installation is to control the compressor to maintain a job fee. This is where the compressor pressure switch comes. It consists of a pressure sensor, a set of electrical contacts, and depending on the specifics of the peripheral device, such as the tightening lever, the switch simply triggers and stops the compressor if necessary. This is achieved by setting an acceptable minimum and maximum pressure on the switch using a built -in controller. The switch then triggers the compressor when the air in the holding tank is exhausted to the point where the minimum minimum pressure is dosaWoman and stop it again when maximum pressure is achieved.

The

compressor pressure switch generally consists of an adjustable diaphragm sensor connected to a set of electrical contacts. The compressor engine control circuit is then directed by contacts. The dimension that supplies the membrane chamber is connected to the reference pressure hose that is connected to the holding tank. Control of pressure settings allows you to set two reference pressures according to system requirements. The compressor pressure switch can be mounted on the compressor itself or on a place where it is easily accessible by the relevant employees.