What is the diode blender?

The

diode blender is a special type of frequency blender used in the manufacture of circuits for radio amplitude modulation (AM). The diode is a non -linear device in that the change in current or voltage across the diode does not cause the corresponding change in the appropriate current or voltage, providing a certain degree of variable resistance. The linear system is a system whose output is directly proportional to its input. As a result, diodes are used in the construction of frequency blends to combine and modulate two signals with them to create the required frequency. Designers, especially those that are AM radio, use this type of circuit to downconvert have received radio frequency signals (RF) at lower middle frequency. This makes it much easier to design the radio signal processing circuits. The alternative can create the required frequency from one input signal that contains multiple lenses if necessary.

dioThe mixer can be used to create frequencies of several basic types depending on the designer's requirements. The first is to create an output composed of the sum of the frequencies of two input signals; The signals are simply together. The second is the output composed of the difference between frequencies and effectively removes the value of one frequency from the other to create an output at a lower frequency. The third is to enforce both signals. The first method creates a clear individual frequency by adding both inputs together, but the third is composed of both signals and undesirable aspects must be filtered further along the perimeter.

Inherent non -linearity of diode mixers is why they are used in different things, but their simplicity often leads to a large degree of "output leak" - that is, undesirable signals mixed with the desired output frequency. For this reason, the diode blender can be very ineffective and more devices must be used in more sensitive systems to filter unwanted signals. Cheap am radios useDiode blends, which is often the cause of fuzzy signals and too distracting static.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?