What did the gang saw?
The gang saw is a type of power saw that makes several cuts simultaneously. Usually the gang saw works like a saw and a conveyor and pulls the kisses over the blades to cut the entire section into the boards by one passage. Older versions of these tools used a reciprocal design of the saw, where the blades are perpendicular to the cutting surface or a circular saw. The most common modern gang is the band on the band. Before the tree reaches the saw, it passes through a series of saws with a single blade that removes the bark and external variations in the tree. After these steps, wood is shaped as a large rectangular box.
This box is sent to a gang saw where it is made on boards. These saws have more blades, each of which is the same distance apart. Most gang saws usually have a kind of transport mechanism that connects with wood, often a system of belts or chains. This allows users to set Speed, which moves the wood through the blades. This is important because wood that moves too slowly can chip and wood that movestoo fast, binds the blades.
Usually the blades on the gang saws are adjustable. This allows workers to change the width of processed boards so that it corresponds to the required specifications. This will save the company from the need for more saw for cutting wood of different widths.
Older gang saws were often returned. This design uses the blades of vertical saws that move up and down. These saws worked well, but used a lot of strength and had seriously limiting the size of the wood they could accommodate. The length of the blades was a fixed amount - the blades required thicker engines and harder blades.
After several years, many mills switched to a circular saw of the gangs. These saws have a large spinning blade in the lower deck of the saw. It was easier to use than a large reciprocation saw and used less power. On the other hand, the size of the wood that could be cut these saws was still limited to the radius of the blade thatThe machine was equipped for use.
Modern gang saws are belt saws. These saws have a rotating strip with file teeth that are constantly moving along the preset track. The bandwidth has the upper and lower part, which limits the overall size of the wood that can pass, but the width is more of a design than technology or material such as older saws.