What Is a Hydraulic Baler?

Hydraulic balers are mainly used in steel plants, crop straws, recycling and processing industries, and non-ferrous and ferrous metal smelting industries. The hydraulic packer can squeeze all kinds of metal scraps (steel shavings, scrap steel, scrap aluminum, scrap copper, scrap stainless steel, and scrap automobile scrap, etc.) into a variety of shapes such as square cubes, octagons, cylinders, etc. Transportation and smelting costs can also increase the speed of the furnace.

Hydraulic baler

Hydraulic baler is mainly suitable for steel plants, crop straws, recycling and processing industries, and non-ferrous,

It consists of mainframe system, hydraulic system and auxiliary components.

Host frame system: The high-quality thick steel plate is aerated and welded. The rugged frame has advanced mechanical design to make the equipment durable.

Hydraulic system:

All models are driven by hydraulic pressure, and manual or PLC automatic control operation can be selected;

There are different ways of discharging, such as flipping, pushing (side pushing and forward pushing) or manual taking (packaging);

No foot screws are required for installation. In places without power, diesel engines can be used as power;

There are ten levels of squeezing force from 63 tons to 400 tons for users to choose, and the production efficiency ranges from 4 tons / shift to 40 tons / shift.

The size of the compression chamber and the size of the block can be customized according to customer requirements.

(1) D series is automatic control type (the entire system is equipped with electrical control box, buttons,

The machine branches power and runs at the same time as other machines, which will not only damage the function of the machine, but also overheat the plug and socket, which may cause a fire. In particular, please pay special attention to the special voltage and capacity for the use of this machine.

The ground terminal of the machine must be connected to the ground. There is a danger of electric shock if the ground wire is not connected or is not fully connected.

The cross-sectional area of the extension cord should be selected according to the installed capacity. Using a cord outside this range will not only damage the machine's function but also overheat the plug and socket, which will cause a fire hazard.

When installing or packing, be sure to use gloves, protective glasses, and masks. If not used, it may be injured or endanger health.

This machine uses packing straps on the packaged objects

Hydraulic

Failure phenomenon

Cause Analysis

elimination method

Remark

System cannot start

1. Power

Proper use of machinery and equipment, careful implementation of maintenance systems and strict adherence to safe operating procedures are necessary conditions to extend the life of the machine, improve production efficiency and ensure safe production. To this end, it is recommended that users establish maintenance and safe operating procedures. Operators should be familiar with the machine structure and operating procedures, and must also pay attention to the following points:

(1) The hydraulic oil added to the fuel tank should be strictly used with high-quality anti-wear hydraulic oil, which must be strictly filtered, and sufficient oil volume should always be maintained. When insufficient, oil should be filled immediately.

(2) The fuel tank should be cleaned and replaced with new oil every six months, but the first time

The hydraulic packer series products include: automatic hydraulic packer, semi-automatic hydraulic packer, fully automatic hydraulic packer, pressurized hydraulic packer, etc. The hydraulic packer products have passed CE, SO9001 and other domestic and international certifications, quality assurance and first-class service.

Hydraulic baler cutter is more scientific: V-shaped notch has better effect and longer life.

Separate take-out and take-up wheels (the take-out and take-up wheels are separated, intuitive and straightforward, relatively integrated, the failure rate is reduced by 60%)

Separate upper and lower slide (relatively integrated, the failure rate is reduced by 60%).

Logistics, postal services, commerce, banking, food, medical, railway, book publishing and other industries.