What is Jamb?
JAMB saws are electric or batteries controlled by machines designed to cut the door before installing hardwood and other types of floors. This makes the process for the floor installation program easier, because instead of cutting around different door drudgery, the installer can simply undermine the JAMB saw and slips under the floor below. This not only simplifies the process, but also provides a better product because it gives the appearance that the covers were originally placed on the floor.
There are two main saw patterns and both are adjustable to suit different floor thicknesses. The first is an oscillation variety, which uses either a flat double -sided blade or a straight blade with teeth only on the front edge. This model is especially good for cutting inside the corners, where two doors meet. It is not as strong as the second, rotary type of radio, but its slower operating speed causes less damage to the cases during the process.
The second design resembles a circular saw located on its side. It uses a round, fully gear, which rotates at high speed. This design is inherently more dangerous for door frames and users. The blade is round and is cut with a circular movement, so it is difficult to use it in tight areas. Regardless of this restriction, it is a saw for professionals, thanks to its strength and speed with which more packaging can cut.
TheJAMB will be produced by many manufacturers, with prices ranging from a low $ 40 (USD) to the highest of more than $ 300. The difference between top and low models is evident in life quality and length. Cheaper models are not suitable for high commercial use, but should suit the occasional installation or to-it-yourself.
When choosing a JAMB saw, the buyer should be aware that a battery -controlled model does not have long -standing cable models. Wood during the process presses the blade so the undercut of the housing attracts hOut of energy. In addition, there are nails and metal strips in some door frames that can draw even more energy during the cutting process. If the installer requires all -day productivity and use on request, an electric variety never has to wait for battery charging and does not lose power as it is used.
Before the arrival of JAMB SAW, the floor installation programs would be laid as a guide to a piece of floor and then undermined JAMBS with a conventional hand. It was a slow, laborious work that added time to work. The motorized JAMB saw this nature of the process and accelerated and accelerated.