What Is a Remote Solenoid?

Normally closed solenoid valves are suitable for actuators that use steam as a heating medium for automatic temperature control. It can carry out two-position automatic control and remote control on boiler steam pipes of steam heaters, radiators, dryers and other complete sets of equipment such as temperature automatic controllers, steam setting machines, steam engines, and steam humidifiers.

Normally closed solenoid valve

Right!
Normally closed solenoid valve is suitable for automatic temperature control with steam as heat medium.
Normally closed solenoid valves are widely used in home-made systems of dyeing, textile, printing and dyeing, food, medicine, cigarette, cement products, petrochemical, metallurgy and other departments.
Installation attention
1. When installing, pay attention to the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place with direct dripping or splashing water. The solenoid valve should be installed vertically upwards;
2. The solenoid valve should ensure normal operation within the fluctuation range of 15% -10% of the rated voltage;
3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. And it needs to be powered on several times so that it can be officially put into use after it is at the proper temperature;
4. Clean the pipeline thoroughly before installing the solenoid valve. The incoming medium should be free of impurities. Filter is installed before the valve;
5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure the system continues to run.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?