What is a mural shame?

The wall is a vertical plate that is mounted inside the wall structure as part of the building framing. The wall is likely to have more than one cold at regular intervals around the width of the wall and will also be present in every corner of the structure. The purpose of these pins is to support the weight of the walls, the ceiling or floor of the above level, and in some cases the pins may also be responsible for supporting the floor of the floor.

The size of the wall pin may vary depending on the type of structure building, although all pins in a certain structure are likely to be uniform. Wood is the most common selection of materials for the wall of the wall, although some types of metals are also used; Metal pins are used for strength, durability, and in some cases to dampen noise transfer, but also tend to be more expensive, more difficult to reduce and more difficult to install than easily usable wooden wall units.

There are two general types of walls: walls walls and load -bearing walls. The load wall of the load will support the weight of the ceiling or the upper level of the structure, while the bearing wall does not support any weight but its own. Sometimes the walls are simply built for aesthetics or for creating divisions in a room or part of the building, or even cover electric wires or plumbing and heating channels. These walls are usually a continuous bearing, which means that the walls of the walls in the structure will not support any weight. It will be necessary to build a wall carrying a load otherwise; Plates or boards that sandwiches from the upper and bottom will usually be built, which means that two pieces of wood will be stacked on top of each other to provide additional support and stability.

It is likely that the wall pin will be directly screwed or nailed a plate, although in some cases special hardware can be used for added stability or easy instaLaci. In other cases, the studs do not have to run directly from the ground to the ceiling; This is common around windows and doors, so other construction techniques must be used to properly delimit the wall for stability and safety.