What Is Mobile Sandblasting?

Mobile sandblasting machine is suitable for sandblasting of large workpieces (such as steel structures, shipbuilding, steel plates, boilers, containers, etc.), and sandblasting for denim clothing in the apparel industry.

Mobile sand blasting machine

This entry lacks an overview map . Supplementing related content makes the entry more complete and can be upgraded quickly. Come on!

Mobile blasting machine suitable for blasting large workpieces

A. Mobile operation, full functions, complete matching, simple and convenient operation.

B. As long as it has a compressed air source, it can perform efficient surface cleaning and sandblasting.

C. Can choose manual or electric sand blasting operation

600 mobile blasting machine is suitable for large-scale blasting treatment of large workpieces (such as steel structures, shipbuilding, steel plates, boilers, containers, etc.) cleaning work, denim blasting in the clothing industry Clean rough surfaces, scales, residual salts and burrs of wrought and cast blanks, welded parts, heat treated parts, stamped parts and machine parts. It is used for the pretreatment process before spraying and electroplating. Finishing accuracy, finishing requirements are relatively high, finishing processing of parts with complex shapes, can also be used as a refurbishment of the body. Product Features of 600 Mobile Sand Blasting Machine:
1. The imported automatic advanced sand-preventing valve developed by foreign advanced technology can keep the intermittent sand time, the blasting cylinder does not release the pressure, improves the processing quality, and reduces the loss of compressed air and abrasives;
2. The blasting speed is fast and the operation is simple and convenient.
3. Can be designed and manufactured according to customer requirements

600 mobile sand blasting machine main technical parameters:
Dimensions: 600 * 1450 (mm)
Height: 1500mm
Diameter: 600mm
Weight: 260kg
Volume: 0.3 m3Working pressure: 7 bar (kg / cm2) 7 Pa (kg / cm2)
Number of spray guns: 1 compressed air flow: 1.5m3 / min

1. The operation process before using the sand blasting equipment is connected to the air source and power supply of the sand blasting machine, and the power switch on the electrical box is turned on. Set the pressure of the compressed air entering the spray gun through the pressure reducing valve between 0.4 and 0.6 MPa as required. When selecting a suitable abrasive injection machine, add the sand slowly to avoid blockage.

2. The operation process of the sand blasting machine equipment when the blasting machine is stopped, the power and air supply of the blasting machine must be cut off. Check whether there is any abnormality in each part. Always check whether the connection of each pipeline is firm. Do not drop any items other than the required abrasives into the work cabin, so as not to affect the circulation of the abrasives. The surface of the workpiece to be processed must be dry.
Note: Never start compressed air with the spray gun unfixed or held!

3. When the operation process of the blasting machine equipment needs to stop processing urgently, press the emergency stop button switch, and the blasting machine will stop working. Turn off power and air to the machine. When the shift is to be stopped, first clean the workpiece and turn off the spray gun switches; clean the work surface, the inner wall of the blasting cabin and the abrasives attached to the mesh plate, and flow them back to the separator. Turn off the dust removal unit. Turn off the power switch on the electrical box. Finally, talk about how to replace the abrasive of the sand blasting machine, thoroughly clean the work surface, the inner wall of the sand blasting gun and the abrasive adhered on the mesh plate, so that it flows back to the separator. Open the leather plug at the bottom of the sand control valve and collect the abrasive into a container. Add new abrasive to the cabin as needed, but start the fan first.