What is the rolling of the fiber?

Fiber rolling is a method of fastening element that involves impressing the thread of screws or screws into the raw stock than is cut. This process uses a hard steel bit created in the shape of the appropriate fiber. The unprocessed stock turned the raw, uncovered material, while the tool bit was pressed against it under high pressure, causing the impression to the surface of the storage surface. The tool bit is constantly maintained under pressure and proceeds towards the stock until the threads are formed to full depth. Rolling the fiber is less expensive as a production process than thread cutting and provides stronger, safer end products. These fasteners are usually made in bulk from the stock of raw metals, which are formed before introducing the fibers in advance. There are two basic methods used to create fibers, namely Cutting fiber and fiber. Thread cutting uses a cutting matrix that is progressed after the length of the rotating empty empty material that physically deletedl metal surface and created fibers. Although this method is effective, it is time consuming and at the same time generates heat that can weaken the fastening element.

The second method, rolling of the fiber, is an excellent process in several senses. In this process, a hardened bit of tool is used to push the fibers into the stock surface. The tool bit is created in the shape of a fiber and is forced to undergo a high pressure against the stock that rotates at a controlled speed. The increasing pressure causes the tool to start to impress its shape on a softer metal material. As soon as the fibers begin to form, the tool bit proceeds towards the stock and maintains the pressure exerted against it. This causes the stunned fibers to deepen until they reach their full depth.

The fiber rolling process has several advantages over thread cutting. The required machinery is easier, the process requires fewer steps with the resulting increase in productiveThe tools and bits of tools have a longer life for good overall cost and benefits of revenue. The thread cutting process also creates high temperatures that tend to weaken the metal material. Rolling the fiber is a cold working process and produces end products that are inherently stronger. Also, Rolling does not create any chips or Swarf that produces a cleaner environment and reduces the risk of injury caused by sharp, freshly cut fibers.