How do I remove the roof mold?
The removal of mold from the house is not only important when preventing a number of serious health conditions, but also providing a better appearance of the house. Although there are many ways to remove roof molds, some of the best include the use of chlorine bleach solutions and copper sulphate solutions. In addition, preventing the growth of roof mold eliminates the need to get rid of it.
One of the best ways of removing the roof mold is the use of chlorine bleaching solution. If you want to do it, start by mixing a solution that combines one part of bleach with three parts of water. Pour the mixture into the hand sprayer, similar to the mixture used for spraying starch on clothing. Be aware that even if this application process can be time consuming, it is necessary to ensure complete saturation. Allow the chlorine bleach solution to remain on the roof for ten to fifteen minutes and then rinse with warm water from the garden hose. Finally, explore the roof for the rest. If there is still any form, repeat this whyES and make sure you rinse the roof after each application of the chlorine bleach.
Another way to eliminate the mold of the roof is the use of copper sulphate solution. In this process, a solution contains one gallon water combined with 12 ounces of copper sulfate. Apply the solution to the roof with a manual sprayer using the same method described by chlorine solution - and do not forget to monitor the roof carefully. Once the mold has brown, use a broom with short and robust bristles to clean the mold from the roof. Finally, wash the remaining molds from the roof using water from the garden hose.
One of the last ways to remove the mold of the roof is to prevent form formation. You want to do it, start by removing all the branches of the trees hanging over the roof, which allows the sun to fully shine on the roof. Molds and molds of the threesome of a cold, humid environment, and thus eliminateThis environment is necessary for their prevention. In addition, consider the use of strips of zinc under one row of shingles near the center of the roof. When the rain comes into contact with the zinc, there is a chemical reaction that inhibits the growth of the form. Finally, consider the application of commercial sprays to prevent mold to prevent the roof. For the best results, these products should be applied at least once a year.