What is the lawn mower clutch?

Grass mower clutch is a safety device that prevents blades from rotating, while the engine of the lawn mower is still running. It can also be a question of comfort for the operator. In older lawns, the clutch stops the wheels to turn so that the operator can empty the catcher without closing the engine. The couplings can be quite complicated and can be found in all types if they are electromechanical devices. In the case of the lawn, the clutch resembles a relatively simple switch on/off.

Both shaft connected to the engine and shaft connected to the blades has a connected plate. The engine shaft is called a flywheel. When the lawn mower clutch is on the grass, the flywheel and the clutch are pushed together so that the engine spins the blades. This is done by strands, levers, hydraulics or combined.

There is also an electrical clutches. When the lawn mower clutch is on the grass, the clutch is separated from the flywheel. This causes the blades to stop. Connection of the lawn mower on the grass attached the engine onlyto remedy. These mowers did not require pushing, they only headed. The problem was that the blades were constantly rotating, even if the mower was stopped.

Some rotary mowers have only one clutch that is for the blades. Even if they have an engine, they must be pushed. The best lawn mowers have a clutch connecting the engine to the rear axle and other connecting motor with blades.

There are also electric couplings. They are common both in small electric mowers and in larger gas mowers with two sets of blades. Are referred to as clutches.

When the lawn mower clutch connects on the grass, the magnet moves to the position inside the coil. This creates an electric current that completes the perimeter between the engine and the shoulder blades. After release, the magnet returns to its position outside the coil and the perimeter is reported to be broken. There is no force on the blade without a complete circuit.