What are the best tips for framing the basement?
framing the basement is a good way to complete the space and make it a habitable part of the house. When completing the space, framing the basement is the first step to ensure that the area can be isolated, operate electricity and otherwise comfortable and aesthetically pleasant. However, framing the basement can be a complex process, because the pipes and other obstacles are common in such a space and often the height between the ceiling and the floor is not uniform, especially in older basements. When framing the basement, start building frames on the ground and lift them to a place. This is particularly important for older houses that have settled, depositing, or where dirt or clay floors are common. The height may not be uniform and the frame may have to be enlarged to the place. Building too large frame will prevent the builders from getting the frame in place. Once the frame is in place, attach the frame using the delayed screws, if the walls are concrete or L-milestones connected to the ceiling if it is the base of the stone.
The alternative to the construction of the frame on the ground and its placement in the framing of the basement is the building of the stick. This includes 2x4 to ceiling beams and 2x4 on the ground. These two pieces should be mutually parallel and it should be treated on the ground by pressure, as it gets into contact with ground moisture and can otherwise deform or rot. Once the pieces are secured, the vertical pins 2x4 can be nailed or screwed to the site every 16 inches (40 cm) in the center.
framing the basement may include framing the basement ceiling to hide pipes or other obstacles. The ceiling must be horizontal before hanging plasterboard, so Ceiling Construction can be something complicated. A false ceiling can be built in almost the same way as the walls, but here are increasingly important to ensure that the 2x4 pins are horizontal to the ground. If not, there may be gaps in plasterboard once framing dOkončeno.
When framing walls and ceilings, it is important to consider access to conductors, pipes, fuses and other commonly accessible items. Try to prevent masonry in fuse boxes or closing valves and take access to any heating equipment. Consider inserting insulation into framing for the added heat in the basement before erecting the plasterboard.