What are the different options for the edge of the road?
Path threats is often an essential element for building construction. It is used for the content of the path material, the transition between the road and the rest of the landscape and acts as an ornamental feature of landscaping, which is independent of other landscape functions. There are several options for the edge of roads such as wood trim, brick edge and stone edges. Landscapes can also opt for plastic trim, metal edges or concrete edges.
wood is popular, especially in areas where moisture levels are low. The most common type of wood trim is designed from lumber, such as 2x4 inches (about 38x89 mm) or 2x6 inches (about 38x140 mm). Usually, wood trim should be treated, so it resists rot. Normally, Redwood and Cedar are among the best for wood.
Some landscapes prefer aesthetics of brick journeys. The easiest way to install brick edges is to set the bricks in the place without using any mortar.This can only be done if the soil is solid. Otherwise, the bricks slip and cause chaos on landscape design.
When creating the edge of the path using bricks without mortar, the bricks can be laid in a ditch that surrounds the path. Most of the brick surface should be below the surface of the track. Bricks can be set vertically or at an angle for a decorative effect.
Some people prefer the more natural appearance of their journey. In these cases, a stone edge may be preferred. Stones, rocks or even boulders can be used to replace the path. Before laying smaller stones, it is best to use a 1 -inch (about 2.5 cm) thick mortar to avoid moving over time. Larger rocks usually look best if they are partially buried but lined on the way. Sometimes the gaps between larger stones can be filled with smataké stones Ller.
less natural but equally effectsThe possibilities for the edge of the road are plastic edges and metal edges. These types of trim are easy to install - along the path are simply set strips of plastic or metal. The shock strips are then held in place.
As with many forms of trim, plastic and metal trim often look best unless they stand out too high. In addition, it is recommended that the strips be buried at least halfway below the ground. These types of edging styles are ideal for roads with lots of curves.
Concrete trim is unique in that it is not prominent, yet it creates well -defined edges on the road. The concrete trim retains the materials creating a path, but also sets the barrier to allow the grass to be cut to the edge of the road. This reduces the need to use weed whip or other equipment.