What is the carburetor of the lawn mower?

grass mower carburetor is a device found on the grass mower with gasoline. The fuel flow into the engine is controlled by the carburetor of the lawn mower. Unlike the system used on the car, the carburetor of the lawn mower is usually mounted in a horizontal way and does not contain any throttle butterflies. With a rubber -type rubber bulb on the side of the carburetor mower on the grass, the fuel is set in the unit several times the bulb depression on the mower with a push type. After the carburetor of the lawn mower was sufficiently prepared for the grass, the engine can be dragged by a tensile rope and running. When the throttle lever is pushed from slow to fast, the air flow increases and the engine begins to work at higher speeds or revolutions per minute (speed), because more fuel is drawn into the carburetor. Inner combustionmaker is nothing but air pump; The amount of air permits into the engine will dictate the amount of energy that the engine capable of producing.

The biggest enemy of the mower carburetor is old gasoline. Leaving old gasoline in a petrol tank on the lawn in the off -season is certainly a recipe to create a harsh module mower in the spring, which is difficult to start. Old gasoline creates in the fuel system known as Shellac. This shellac gives internal functioning and air and fuel nozzles in the carburetor of grass mower that blocks fuel and air before passing through them. The only drug for a rubber carburetor carburetor is thorough cleaning, which includes the removal of the carburetor and the use of a quality carburetor cleaner to reduce the offensive shellac.

Although not recognized as the main cause of damage, dirt is the definitive enemy of any lawn mower. Maintaining a clean and operating air purifier on the mower prevents most of the impurities and residues of the entrance to the carburetor. Typically made foam with oil coating, air filter of lawn moweris easy to clean and maintain. After removing the air filter cover using a single screw using a surface screwdriver, the foam filter can be clean with hot soapy water. Quality detergent bowls with ease will reduce fat and dirt.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?