What is a solar collector?

Solar collector is a device used to capture the thermal energy of the Sun and convert to a mold that people are easier to use. Unlike the photovoltaic cell, the solar collector is a relatively low technician and can be created and installed at very low costs. The most basic type of solar collector includes some kind of liquid medium, which is heated by sunlight and then transported to distribute heat elsewhere.

A simple form of a solar collector can be seen by leaving a large black container filled with water outside under the hot sun. After just a few hours, the water in the container will be absorbed a lot of sunlight and will be very hot. This hot water can be used for a simple purpose, such as a shower, to fill the bottle of hot water to warm up a sleeping bag or some other forms of heat distribution. More complicated collectors take this basic concept and expand it, which streamlines the heat collection and the hero distribution more dynamic.

One of the main ways to streamline the solar collector is the use of a transport medium that differs from heating. While water itself makes a perfectly usable medium, many people prefer to use something else, depending on the environmental situation. For example, in regions where temperatures drop under frost under frost, water can be used against frost instead of water to prevent pipe or boards. Glycol is also often used as a heating medium, as it can be more comfortable to handle and is viscous than water, but remains excellent heat retention.

Often the solar collector uses the pipes to push the water to warm it up faster. These pipes will generally be made of something that is a strong thermal conductor, such as copper, and will run back and forth on the surface use it as best as possible. Water will be forced over the pipeline to heat under the sun, and when it is hot enough, it will be lowered to the tank nEBO directly to the application where heat can be used.

One place where solar collectors are often used is the heating of the interior of the buildings, usually by passing the floor. The water can be heated by the sun and then forced the pipes built into the floor of the stone plate, where the heat emits to heat the air mass of the room. It can be a cheap and renewable source of heating energy in places with sufficient solar exposure.

In general, the solar collector of seasonal use, while the heat it absorbs is used within one or two days, so it is ideal only during the summer months in most places. In some cases, however, sufficient thermal mass can ensure that heat storage is possible for many months. For example, some large housing complexes began to experiment with the use of millions of gallons of water as a thermal mass that can be heated during the summer, and then use it as a source of heating throughout the winter.

IN OTHER LANGUAGES

Was this article helpful? Thanks for the feedback Thanks for the feedback

How can we help? How can we help?